Does your Dyson switch off after a few minutes or pulsate? Causes and solutions
Cordless Dyson vacuum cleaners (V6, V7, V8, V10, V11, V15) are sturdy machines, but after a few years of daily use they almost always show the same symptoms. The good news: in most cases you don't need to buy a new one. Here's what the most common problems mean and what you can check yourself.
It switches off after a few minutes
It's the most common fault. Lithium batteries lose capacity with charging cycles: after a few years, a Dyson that used to last 30 minutes may stop after two or three, especially on maximum mode.
What you can check: try using it in normal mode instead of maximum. If it lasts much longer in normal mode, the battery is worn out. If it switches off straight away even with a freshly charged battery, the battery is probably at the end of its life.
It pulses, switching on and off in bursts
A motor that "pulses" is how the Dyson protects itself when something is wrong. There are two common causes:
- A blockage: a clogged filter, or a tube or brush blocked by dust, hair or something that's been sucked up. The motor overloads and stops intermittently.
- The battery: a battery with unbalanced cells can't deliver the current required, so the Dyson keeps switching off and on again.
What you can check: detach the tube and brush and switch on the main body only. If it stops pulsing, the problem is in the tube or the brush. Then check the filters: wash them in cold water, without detergent, and leave them to dry completely (at least 24 hours) before putting them back. A filter refitted while damp makes things worse.
It won't switch on or charge
Before suspecting the motor, check the simple things: the socket, the charger (does the light come on when you plug it in?) and the charging contacts, which can get dirty. If the charger works and the battery won't charge, the problem is almost always the battery or, more rarely, the circuit board in the motor body.
The button is broken or doesn't stay on
On the V10 and V11, the power button is a known weak point: it cracks or stops making contact. It can be replaced without changing anything else, and it's worth fitting a reinforced one.
The brush doesn't spin or suction is weak
Hair and threads wrapped around the roller can block it: cut them off with scissors, taking care not to cut the bristles. If the roller is free but doesn't spin, the brush motor may be faulty. If suction is weak, empty the bin above the MAX line, clean the cyclone and look for blockages in the tube.
When to stop straight away
If you smell burning, hear metallic noises or the motor makes an unusual sound, switch it off and don't use it again. Carrying on can permanently damage the motor body.
Is it worth repairing?
Almost always, yes. A battery, a button or a roller costs far less than a new vacuum cleaner, and the rest of the machine can last for years. If your Dyson is still under Dyson warranty, we recommend using that. Out of warranty, at our workshop in Contone we open it up, tell you what's wrong and give you a free quote. You choose the spare parts: original or premium. We only repair if you agree.
You can bring it to Contone by appointment or send it to us from anywhere in Switzerland: just the main body with the battery and the charger. You'll find all the details on the Dyson repair page, or call us on 091 252 55 50.
i-Lab is an independent repair centre, not affiliated with Dyson. Dyson and model names are trademarks of their respective owners.
